FCH Member Advertisement
FCH News
#3, Industrial Hardware
> 200 matches, #3, Industrial Hardware. Showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| ISSCO | MO | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 1/8 x 150# | full face red rubber gasket 150# | 132 |
|
| NutsBolts | NE | Nails | 3 x .120 | 3 x .120 coil nail | 62500 |
| ||
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 3 x 13/16 | caster swivel threaded stem wheel sz 3 x 13/16 wheel material thermoplastic rubber bearing plain w/tech lock brake thread sz 5/16-18 x 3/4 overall ht 3-5/8 load cap 100 lbs | 8 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 x 7/8 | 3 x 7/8 swivel caster w/brake | 44 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 x 1 | 3x1 stem caster w/brake | 16 |
| ||
| NutsBolts | NE | Latches & Catches | 3 x 1 x 5/8 | latch overcenter strike & lever 3 x1x5/8 | 300 |
| ||
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 3 x 1 1/4 | 3in x 1-1/4in polypropylene plastic wheel 125lb cap.1-1/18 hub length 5/16 bore | 2 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 x 1 1/4 | caster swivel-threaded stem stem size 1/2 d-13 x 3/4 l wheel size 3 x 1-1/4 wheel mat polyurethane bearing ball load ht 4 load cap 250 lbs | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plain | 3 x 1 1/4 | caster swivel-threaded stem wheel size 3 x 1-1/4 wheel mat sintered iron bearing plain bore load ht 3-5/8 load cap 300 lbs temp rt-45 to +600 f | 2 |
| |
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 3 x 1 1/4 | caster chrome swivel hollow kingpin stm sz 1/2 id wheel sz 3 x 1-1/4 wheel mat thermoplastic rubber bearing precision w/total lock brake thread guards load ht 4-5/16 load cap 190 lbs temp rt-30 to +210 f | 1 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 1 1/4 | caster swivel-threaded stem stm sz 1/2 d-13 x 1-1/2 l wheel sz 3 x 1-1/4 wheel mat quickstart rubber bearing precision ball load ht 4-7/32 load cap 200 lbs | 4 |
|
| Endries | WI | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 1 1/4 | 3x1-1/4 soft rubber wheel caster | 50 |
|
| Liberty | IL | Staples | Galvanized | 3 x 1 1/4 x 1/4 | 375753 3in long diamond tip staple galvanized 3 x 1-1/4 x 1/4 galvanized rolled diamond point staples | 100 |
| |
| SII | IN | Handles | 3 x 1000 x 90 | 3 x 1000 x 90g hand film 18rl/case w/o hndl 3 cor | 259 |
| ||
| HBBOLT | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Plain | 3 x 2 5/16 | angular strut fitting 45 deg e.g. | 18 |
|
| OneMonroe | MN | Hinges | 3 x 3 | 3 x 3 loose joint hinge | 90 |
| ||
| OneMonroe | MN | Hinges | 3 x 3 | 3 x 3 loose joint hinge with 2 oval & 2 round holes | 28 |
| ||
| B & K FAST | PA | Hinges | 3 x 3 | 3 x 3 butt hinge .092 thick weld style x .225 pin diam. | 2 |
| ||
| OneMonroe | NC | Hinges | Brass | 3 x 3 | satin brass 3x3 hinge-each | 100 |
| |
| OneMonroe | NC | Hinges | 3 x 3 | 3 x 3 square corner ( each ) residential hinge | 23 |
| ||
| OneMonroe | NC | Hinges | 3 x 3 | square corner hinge 3 x 3 | 1 |
| ||
| OneMonroe | NC | Hinges | 3 x 3 | 3 x 3 butt hinge | 100 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 3 | 3 x3 butt hinge with 3/16 pin removeable pin stainless steel | 3 |
| |
| OneMonroe | NC | Hinges | 316, 317, A4 Stainless | 3 x 3 | 3 x 3 stainess steel butt hinge 316 material | 9 |
| |
| OneMonroe | NC | Hinges | 3 x 3 | 3 x 3 broad loose pin hinge | 36 |
| ||
| OneMonroe | NC | Hinges | 3 x 3 | 3 x 3 flag style loose joint hinge | 10 |
| ||
| OneMonroe | NC | Hinges | 3 x 3 | 3 x 3 butt hinge | 2 |
| ||
| QFC | TX | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 3 | sld hinge 3x3 ss | 160 |
| |
| QFC | TX | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 3 | sld hinge 3x3 ss | 340 |
| |
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cgi w/304 inner/outer rings spiral wound gasket | 2 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 3 | 3 3-600# 316/graph cgi w/316 inner/outer rings spiral wound gasket | 2 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 3 | 3 3-600# 316/graph cgi w/316 inner ring spiral wound gasket domestic | 3 |
| |
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 3-600# 1/8 neoprene full face gasket | 1 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 3-600# 1/8 cloth inserted neoprene full face gasket | 1 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 3-600# 1/16 red rubber full face gasket | 25 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 3-600# 1/16 red rubber ring gasket | 4 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 3-600# 1/8 red rubber ring gasket | 21 |
|
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 3 | 3 3-600# 316/graph cgi w/316 inner ring spiral wound gasket | 6 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 3 | 3 3-600# 316/graph cg spiral wound gasket | 18 |
| |
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cgi w/304 inner ring spiral wound gasket domestic | 98 |
| ||
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cg spiral wound gasket | 314 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 3 | 3 3-600# 316/apx-2 cg spiral wound gasket domestic | 5 |
| |
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cgi w/304 inner ring spiral wound gasket flexitallic | 9 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 x 3 | 3 3-600# 316/ptfe cgi w/316 inner ring spiral wound gasket | 3 |
|
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cg spiral wound gasket flexitallic | 15 |
| ||
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 304/graph cgi w/304 inner ring spiral wound gasket | 81 |
| ||
| SunPack | FL | Gaskets | 3 x 3 | 3 3-600# 347/graph cgi w/347 inner ring spiral wound gasket | 39 |
| ||
| SunPack | FL | Gaskets | Superalloy (Inconel, Hastelloy, Alloy 20) | 3 x 3 | 3 3-600# inconel 625/graph cgi w/inconel 625 inner ring spiral wound gasket | 3 |
| |
| SunPack | FL | Gaskets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 3 x 3 | 3 3-600# monel 400/graph cgi w/monel 400 inner ring spiral wound gasket | 4 |
| |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 3 1/2 | 3 x 3-1/2 butt hinge stainless steel | 31 |
| |
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 5 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 4 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 1 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 3 |
| ||
| OneMonroe | NC | Hinges | Aluminum | 3 x 4 | 3 x 4 butt hinge aluminum | 8 |
| |
| OneMonroe | NC | Hinges | 3 x 4 | 3 x 4 flag style loose joint hinge | 15 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 5 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 4 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 1 |
| ||
| OneMonroe | MN | Hinges | 3 x 4 | 3 x 4 loose joint hinge | 3 |
| ||
| Endries | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 4 | whss80240lf 3x4in stainless steel left hand female lift off hinge (guden only) | 61 |
| ||
| Endries | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 4 | whss80240lm 3x4in stainless steel left hand male lift off hinge (guden only) | 61 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | 3-13/16 x 4 5/8 | caster rigid-plate wheel size 3 x 1-1/2 wheel mat moldon polyurethane on polyolefin bearing delrin load ht 4-1/2 top plate size 3-13/16 x 4-5/8 bolt hole ptrn 2-5/8 x 3-5/8 slotted to 3 x 3 load cap 250 lbs temp rt-45 to +180 f | 1 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Steel | 3-11/16 x 5 3/8 | floor lock material steel use with caster size 4 extended height 5-5/8 retracted height 4-11/16 top plate size 3-11/16 x 5-3/8 bolt hole pattern 2-5/8 x 3-5/8 | 10 |
| |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 72 | 1240 ss 3 x 72 hinge | 10 |
| |
| Ababa | CA | Handles | Steel | 3 x 9 | 3 x 9 long handle scratch brush steel | 13 |
| |
| Ababa | CA | Handles | Steel | 3 x 9 | 3 x 9 long handle scratch brush steel | 2 |
| |
| Ababa | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 9 | 3 x 9 long handle scratch brush stainless steel | 5 |
| |
| Ababa | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 9 | 3 x 9 long handle scratch brush stainless steel | 1 |
| |
| B & K FAST | PA | Nails | Copper | 3 x 10 | 3 x 10ga copper roofing nail | 1 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 900 | 3 900# 316/graph cgi w/316 inner ring spiral wound gasket | 36 |
| |
| SunPack | FL | Gaskets | 3 x 900 | 3 900# 304/non-asb cg spiral wound gasket | 1 |
| ||
| SunPack | FL | Gaskets | 3 x 900 | 3 900# 304/graph cg spiral wound gasket | 2 |
| ||
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 x 900 | 3 900# 304/ptfe cgi w/304 inner/outer rings spiral wound gasket | 1 |
| |
| SunPack | FL | Gaskets | 3 x 900 | 3 900# 304/graph cgi w/304 inner ring spiral wound gasket | 8 |
| ||
| Mansco | MI | Hinges | Aluminum | 3 x 14.13 | continuous hinge | 198 |
| |
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 x 150 | 3 150# 316/ptfe cg spiral wound gasket | 48 |
|
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cgi w/304 inner/outer rings spiral wound gasket | 1 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 347/graph cgi w/347 inner ring spiral wound gasket | 33 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 1/8 garlock 3400 ring gasket | 16 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/thermiculite cg spiral wound gasket flexitallic | 26 |
| ||
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/8 epdm full face gasket | 157 |
|
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 1/8 garlock 3300 ring gasket | 11 |
| ||
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/8 epdm ring gasket | 10 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/16 cloth inserted neoprene ring gasket | 14 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/8 neoprene full face gasket | 10 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/16 red rubber full face gasket | 1 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/8 red rubber ring gasket | 5 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/16 red rubber ring gasket | 3 |
|
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 150 | 3 150# 1/8 red rubber full face gasket | 524 |
|
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cg spiral wound gasket low stress | 2 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cgi w/304 inner ring spiral wound gasket | 427 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cgi w/304 inner/outer rings spiral wound gasket domestic | 1 |
| ||
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cg spiral wound gasket domestic | 8 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 x 150 | 3 150# 316/graph cg spiral wound gasket domestic | 1 |
| |
| SunPack | FL | Gaskets | 3 x 150 | 3 150# 304/graph cg spiral wound gasket flexitallic | 37 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole flat plate fitting eg korfit-unistrut | 85 |
| ||
| C & S Fas | FL | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 | (10d) 3 nail ring shank 304ss smooth ( 25lbs/ctn ) | 1155 |
| |
| OneMonroe | MN | Hinges | 3 | 3 light weight tee hinge | 38 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 3 | 3 shepard caster | 3 |
| ||
| Set Screw | IL | Knobs & Star Grips | Aluminum | 3 | 3-star bulbing style blind rivet 5/32 diameter .739 shank .039/.275 grip range | inquire |
| |
| METRO IND | OH | Hinges | #3 | #3 sectional garage door hinge stanley | 5 |
| ||
| OneMonroe | MA | Grommets & Eyelets | 3 | grommet edging spring-fast size 3 25 ft/reel | 4 |
| ||
| Ababa | CA | Hinges | Steel | Zinc/Clear | 3 | 3 light narrow hinge steel zinc | 5 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3 in swivel caster plate mnt | 2 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3 business machine caster | 46 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3in rigid caster | 3 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3in rigid caster | 23 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3 caster | 8 |
| ||
| OneMonroe | NC | Handles | 3 | 3 pt. lock with adj. handle | 3 |
| ||
| OneMonroe | NC | Handles | 3 | 3 pt. lock with adj. handle & safety hasp w/inside release | 2 |
| ||
| OneMonroe | NC | Hinges | 3 | 3 cabinet hinge | 36 |
| ||
| OneMonroe | NC | Hinges | Brass | 3 | 3 solid brass hinge 80-0090 | 7 |
| |
| OneMonroe | NC | Hinges | 3 | 3 fixed staple hinge hasp | 15 |
| ||
| OneMonroe | NC | Gaskets | 3 | red hi-temp rtv silicone gasket maker 3 | 2 |
| ||
| OneMonroe | NC | Hinges | 3 | 3 hinged split ring hanger e.g. | 40 |
| ||
| OneMonroe | NC | Hinges | 3 | 3 hinged split ring hanger p.c. | 20 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 | 3 hinged split ring hanger s.s. | 4 |
| |
| OneMonroe | NC | Protective Caps & Plugs | Black Oxide | 3 | utility cart w/end panels wheels 3 length 33.63 width 18.63 height 36.63 load cap 150 lbs. color blk | 1 |
| |
| OneMonroe | NC | Brackets & Supports | #3 | prop bracket with #3 ball stud | 82 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | caster-3 rigid hard rbr 270# | 33 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 3 | 3 shepard caster | 3 |
| ||
| OneMonroe | MN | Hinges | 3 | 3 light weight tee hinge | 38 |
| ||
| Express | CA | Hinges | Steel | Galvanized | 3 | 3 hole adjustable hinge electro galvanized | 26 |
|
| Ababa | CA | Gaskets | 3 | 3m virtua ccs protective glasses w/foam gasket cleat anti-fog lens | 22 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 90 deg. fitting eg korfit-unistrut | 85 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 90 deg. fitting eg korfit-unistrut | 85 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 90 deg. fitting eg korfit-unistrut | 85 |
| ||
| B & K FAST | PA | Staples | Steel | Galvanized | 3 | 3 galvanized pole line staples-.250 x 1.75 x 3.00 long | 600 |
|
| B & K FAST | PA | Strut Systems (Channels, Clamps, Hangers, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 | 3 stainless unistrut clamp set t-304 | 1 |
| |
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 90 deg. fitting eg korfit-unistrut | 85 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 90 deg. fitting eg korfit-unistrut | 85 |
| ||
| QFC | TX | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Steel | Black Oxide | 3 | 3m black bumper (b8014) | 1290 |
|
| Active | Expansion Plugs | 3 | 3 concave expansion plug | 21 |
| |||
| MAINSOURC | NH | Protective Caps & Plugs | Plastic | 3 | caplug 3x | 559 |
| |
| SunPack | FL | Gaskets | 3 | # 1/8 304 corrugated metal/graphite faced ring gasket | 10 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/8 garlock-gylon 3545 white full face gasket | 106 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/8 garlock-gylon 3500 fawn full face gasket | 35 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/16 garlock-gylon 3500 fawn full face gasket | 34 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/16 klinger graphite sls ring gasket | 12 |
| ||
| HBBOLT | CA | Brackets & Supports | 3 | 3 hole 90 deg 2 1/4x3 1/2 angle bracket eg | 20 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 | 3 150# 316/ptfe cgi w/316 inner/outer rings spiral wound gasket | 10 |
|
| Endries | WI | Grommets & Eyelets | Brass | #3 | #3 brass grommet | 19039 |
| |
| SunPack | FL | Gaskets | 3 | # 1/16 garlock 3200 full face gasket | 3 |
| ||
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 | 3 3-600# 316/graph cg spiral wound gasket domestic | 10 |
| |
| SunPack | FL | Gaskets | 3 | 3 1500# 304/graph cgi w/304 inner ring spiral wound gasket domestic | 1 |
| ||
| THRDFAST | FL | Gaskets | 3 | 3 full face flange gasket | 89 |
| ||
| THRDFAST | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 | 3in 150lb fu ll face rubber gasket | 20 |
|
| THRDFAST | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 | 3in 150lb red rubber ring gasket | 19 |
|
| THRDFAST | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 | 3in 150lb ff neoprene gasket 1/8 thk | 11 |
|
| THRDFAST | FL | Gaskets | 3 | 3in 150lb ring gasket non asb 1/8 thk | 3 |
| ||
| THRDFAST | FL | Gaskets | 3 | 3in 150lb ring gasket non asb 1/16 thk | 3 |
| ||
| THRDFAST | FL | Gaskets | 316, 317, A4 Stainless | 3 | 3 gasket 600# 3/16 316/fg/crs | 1 |
| |
| SunPack | FL | Gaskets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3 | 3 300# alloy 20/ptfe cgi w/alloy 20 inner ring spiral wound gasket | 6 |
|
| SunPack | FL | Gaskets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3 | 3 150# alloy 20/ptfe cgi w/alloy 20 inner ring spiral wound gasket | 18 |
|
| SunPack | FL | Gaskets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3 | 3 300# alloy 20/ptfe cgi w/alloy 20 inner ring spiral wound gasket | 6 |
|
| SunPack | FL | Gaskets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3 | 3 150# alloy 20/ptfe cgi w/alloy 20 inner ring spiral wound gasket | 18 |
|
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 | 3 1500# 316/graph cgi w/316 inner ring spiral wound gasket | 1 |
| |
| SunPack | FL | Gaskets | 3 | 3 2500# 304/graph cg spiral wound gasket | 2 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/8 klingersil c-4401 ring gasket | 1 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/16 garlock ifg-5500 full face gasket | 149 |
| ||
| SunPack | FL | Gaskets | 3 | # 1/16 garlock 3400 ring gasket | 5 |
| ||
| SunPack | FL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | 3 | # 1/8 neoprene full face gasket | 178 |
|
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 | # 1/8 teflon ring gasket | 7 |
| |
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3 | # 1/16 teflon ring gasket | 115 |
| |
| SunPack | FL | Gaskets | 3 | 3 1500# 304/graph cgi w/304 inner ring spiral wound gasket | 1 |
| ||
| SunPack | FL | Gaskets | 3 | 3 1500# 304/graph cgi w/304 inner/outer rings spiral wound gasket | 1 |
| ||
| SunPack | FL | Gaskets | 3 | 3 1500# 304/graph cg spiral wound gasket | 1 |
| ||
| IRF | NJ | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 | 3 wing knob molded w/pa6 gf15 grey ncs 5502 b over m6-1.0 ss hex nut | 20590 |
| |
| SRF | AL | Grommets & Eyelets | Brass | Plain | #3 | rolled rim grommet | 4 |
|
| SunPack | FL | Gaskets | 316, 317, A4 Stainless | 3 | 3 150# 316/graph cgi w/316 inner ring spiral wound gasket domestic | 3 |
| |
| SunPack | FL | Gaskets | 3 | 3 150# 304/apx-2 cgi w/304 inner ring spiral wound gasket domestic | 1 |
| ||
| BoltCraft | NE | Hook & Loop Products (Velcro, Teccro, etc.) | 3 | 3m hook & loop system 1 x 12 | inquire |
| ||
| BoltCraft | NE | Nails | 3 | 3 masonry cut nails 50 lb box | inquire |
| ||
| Endries | WI | Handles | Plastic | Plain | 3 | 3 white plastic drawer pull handle | 800 |
|
| Endries | WI | Hinges | 3 | 3 way adjustable concealed hinge | 4 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole strut 90 angle 1 7/8 x 3 7/8 | 29 |
| ||
| NutsBolts | NE | Brackets & Supports | 3 | large flute span bracket fsb3 | 100 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole z fitting for 1 5/8 strut eg | 100 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 rigid strut pipe clamp | 45 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole strut 90 angle 1 5/8 x 4 1/8 | 543 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 3 1/4 u fitting strut (tophat) | 41 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 13/16 u fitting strut (tophat) | 50 |
| ||
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 | 3 hole 2 7/16 u fitting strut (tophat) | 28 |
| ||
| NutsBolts | NE | Grommets & Eyelets | #3 | #3 unigrip center exit 1/4 90 eyelet end fixing 240 lb wl | 20 |
| ||
| NutsBolts | NE | Grommets & Eyelets | #3 | #3 unigrip center exit 1/4 90 eyelet end fixing 240 lb wl | 20 |
| ||
| NutsBolts | NE | Grommets & Eyelets | #3 | #3 cable 1/4 90 eyelet end fixing 20ft | 200 |
| ||
| NutsBolts | NE | Grommets & Eyelets | #3 | #3 cable 1/4 90 eyelet end fixing 30ft | 100 |
| ||
| NutsBolts | NE | Grommets & Eyelets | #3 | #3 cable 1/4 90 eyelet end fixing 10ft | 200 |
| ||
| MidStates | MI | Hinges | 3 | 3 broad utility hinge | 50 |
| ||
| MidStates | MI | Hinges | 3 | 3in hinged hasp | 27 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
